GARLAND TEXEL 389 QG-V21
Brokeer with 4 T motor of 38.9 cc, 1.4 hp and high torque, without using oil mixture, more environmental respectful and with less emission of noise and vibrations, extends the hours of use reducing tiredness .
Its engine has double segment pistons, of greater compression, which gives it greater efficiency, as well as complete crankshaft with double support that reduces vibrations.
Double 19 mm folding handlebar to facilitate transport. With the independent regulation of inclination and turn, you do not lose your personal adjustments by folding the handlebar to save the machine.
It has a removable tap & go head without tools and with optimized design for rapid wire assembly.
Includes double harness, for a better distribution of weight, with security disconnection system.
Engine Type.Garland 4 T
Cylinder capacity (cc)38,9
EURO standardEuro V
Electronic ignition (Yes/No)Si
Start (Manual/Electric)Manual
Power (kW)1
Power (hp)1,4
Idle min-13000
Maximum engine revolutions min-110000
Torque (Nm)1,35
Consumption (kg/kWh)0,555
Autonomy (min)61
Anti-vibration handlebar (normal/extra)Normal
Transmission (rigid/flexible/belt/direct)Rígida
Split Transmission (Yes/No)No
Handlebar type.Doble/Plegable
Folding handlebar without tools (Yes/No)Si
Thread head typeSemiautomático
Max. rpm force/transmission (min-1)10947,368
Clutch rpm (min-1)3950
Gear ratio16/19
Width with thread (mm)420
Width with disc (mm)255
Vibration level (medium)13,5
Cte. uncertainty vibrations k (ms-2)1,5
Sound pressure (dB (A))97
Uncertainty constant k (dB(A))3
Sound power (dB (A)) (guaranteed/measured)117
Handlebar tube diameter (mm)22
Handlebar tube thickness (mm)1,2
Trans. tube diameter (mm)28
Transm tube thickness (mm)1,5
Fuel dep. vol. (l)0,9
Length in use (cm)182
Width in use (cm)38
Height in use (cm)45,5
Packaging weight (kg)8,9
Packaging length (cm)27
Packaging width (cm)184
High packaging (cm)26
ManualView file
Ficha técnicaView file

MAQUINAS RELACIONADAS

FAQS

What advantages does the 4-stroke engine of the Texel 389 QG-V21 provide?
Being a 38.9 cc and 1.4 HP 4-stroke engine, it does not require a mixture of gasoline and oil, making it more convenient to refuel and more respectful of the environment. In addition, it offers high torque, lower noise and vibration emissions compared to an equivalent 2T and allows longer working hours with less fatigue.
What cutting accessories does it come as standard?
Includes 3-point disc (cutting width 255 mm) for thickets and hard weeds, and Tap&Go head (width with line 420 mm) for grass and finishes. It also comes with a double harness that distributes the weight on both shoulders and has a safety disconnection system.
Is it practical to store and transport?
Yes, it has double folding handlebars without tools, with independent tilt and turn adjustment. This means that when you fold it to store the machine you do not lose your personal settings, and when you unfold it you recover your usual working posture.
What basic maintenance does a 4-stroke engine like this need?
As it is a 4T, in addition to checking the fuel level (0.9 l tank), you must monitor the oil level and change the crankcase according to the intervals in the manual. It is also a good idea to check the air filter, spark plug and angle head lubrication to preserve performance.
Does it comply with European emissions regulations?
Yes, it complies with the Euro V standard and has electronic ignition, which is reflected in more stable starts and cleaner combustion. The guaranteed sound power is 117 dB(A) and the sound pressure is 97 dB(A), so the use of noise helmets is essential.
How is the Tap&Go head that it mounts different?
It has an optimized design for quick assembly of the thread and is disassembled without tools, which speeds up reloading and cleaning during work. For the recommended thickness and type of thread, as well as compatible replacement parts, it is advisable to check the technical data sheet and the product manual.